PLAW Alpha
pewag winner profilift lifting point PLAW Alpha.
Simply the best!
Ця такелажна точка обертається на 360 °. Навантажувальне кільце завантажується в широкому діапазоні і може бути розташоване під будь-яким необхідним кутом завдяки його змінній та запатентованій пружині. Шестигранний спеціальний гвинт також замінний. PLAW pewag winner alfa гвинт, виготовлений з матеріалу класу міцності 10.9, 100% випробуваний на тріщини, покритий захисним матеріалом, стійким до корозії. Profilift alfa здатна витримувати 4-кратний коефіцієнт безпеки від розриву у всіх напрямках, і кожна такелажна точка позначена індивідуальним серійним номером. Версії з метричною різьбою також доступні з індивідуальними довжинами. Всі параметри вантажопідйомності, класифіковані за типом застосування, кількістю ніжок і кутом нахилу, містяться в таблиці, яка є невід'ємною частиною посібника з експлуатації, що входить до кожної такелажної точки.
Також доступний з peTAG за запитом.
Описание продукта
Permitted usage
For load capacities in the permitted directions of pull, please refer to the load capacity table.
Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:
- Direction of pull is obstructed.
- Direction of pull is not within the indicated area.
- Loading ring rests against edges or loads.
The load ring must be placed in the direction of pull before loading – do not turn under load! For additional details and information, please refer to the full operating manual.
Calculating the required thread length (L):
L = H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.
In addition to the standard and maximum thread lengths, pewag also offers cut-to-length thread lengths. Customised and maximum thread lengths are supplied with a washer and a screw nut.
For detailed information such as method of lifting, number of legs, angle of inclination etc., please refer to the tables with technical data.
3D-зображення
Видео
Таблиця характеристик
| PLAW Alpha | Code / Type | thread [mm] |
load capacity [kg] |
a [mm] |
b [mm] |
c [mm] |
d [mm] |
e [mm] |
g [mm] |
h [mm] |
k [mm] |
n [mm] |
n max [mm] |
 [mm] |
 [mm] |
weight [kg/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
PLAW 0,3 t | M8 | 300 | 45 | 67 | 40 | 11 | 41 | 95 | 36 | 55 | 20 | 150 | 10 | 24 | 0.57 | PLAW 0,63 t | M10 | 630 | 45 | 67 | 40 | 11 | 41 | 95 | 36 | 55 | 20 | 150 | 10 | 24 | 0.58 | PLAW 1 t | M12 | 1,000 | 45 | 67 | 40 | 11 | 41 | 95 | 36 | 55 | 20 | 170 | 10 | 24 | 0.60 | PLAW 1,5 t | M16 | 1,500 | 45 | 67 | 40 | 11 | 41 | 95 | 36 | 55 | 24 | 260 | 10 | 24 | 0.60 | PLAW 2,5 t | M20 | 2,500 | 54 | 81 | 50 | 13 | 55 | 112 | 50 | 67 | 33 | 335 | 8 | 24 | 1.10 | PLAW 4 t | M24 | 4,000 | 54 | 87 | 50 | 17 | 67 | 142 | 45 | 70 | 36 | 361 | 14 | 36 | 1.60 | PLAW 6 t | M30 | 6,000 | 68 | 108 | 60 | 20 | 68 | 148 | 55 | 85 | 45 | 360 | 14 | 36 | 2.50 | PLAW 7 t | M36 | 7,000 | 75 | 115 | 67 | 20 | 65 | 143 | 60 | 100 | 55 | 374 | 27 | - | 3.30 | PLAW 8 t | M36 | 8,000 | 93 | 147 | 85 | 27 | 87 | 188 | 85 | 120 | 55 | 365 | 19 | 41 | 3.80 | PLAW 10 t | M42 | 10,000 | 93 | 147 | 85 | 27 | 87 | 188 | 85 | 120 | 65 | 365 | 19 | 41 | 4.80 | PLAW 15 t | M42 | 15,000 | 115 | 181 | 105 | 33 | 108 | 246 | 106 | 150 | 63 | 340 | 19 | 55 | 12.00 | PLAW 20 t | M48 | 20,000 | 115 | 181 | 105 | 33 | 108 | 246 | 106 | 150 | 73 | 340 | 19 | 55 | 12.30 |
| PLAW Alpha | Code / Type | thread [inch] |
load capacity [lbs] |
a [inch] |
b [inch] |
c [inch] |
d [inch] |
e [inch] |
g [inch] |
h [inch] |
k [inch] |
n [inch] |
n max [inch] |
[inch] |
[inch] |
weight [lbs/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLAW U 3/8 | 3/8"-16 | 1,400 | 1.77 | 2.64 | 1.57 | 0.43 | 1.61 | 3.72 | 1.42 | 2.17 | 0.79 | - | 3/8" | 15/16" | 1.30 | PLAW U 1/2 | 1/2"-13 | 2,200 | 1.77 | 2.64 | 1.57 | 0.43 | 1.61 | 3.72 | 1.42 | 2.17 | 1.30 | - | 3/8" | 15/16" | 1.32 | PLAW U 5/8 | 5/8"-11 | 3,300 | 1.77 | 2.64 | 1.57 | 0.43 | 1.61 | 3.72 | 1.42 | 2.17 | 1.30 | - | 3/8" | 15/16" | 1.39 | PLAW U 3/4 | 3/4"-10 | 5,500 | 2.13 | 3.19 | 1.97 | 0.51 | 2.17 | 4.41 | 1.97 | 2.64 | 1.30 | - | 3/8" | 1 1/8" | 6.60 | PLAW U 1 | 1"-8 | 8,800 | 2.95 | 4.53 | 2.64 | 0.79 | 2.68 | 5.63 | 2.64 | 3.94 | 1.42 | - | 3/4" | - | 6.80 | PLAW U 1 1/4 | 1 1/4"-7 | 13,200 | 2.95 | 4.53 | 2.64 | 0.79 | 2.68 | 5.63 | 2.64 | 3.94 | 1.93 | - | 7/8" | - | 13.70 | PLAW U 1 1/2 | 1 1/2"-6 | 17,600 | 3.66 | 5.79 | 3.35 | 1.06 | 3.35 | 7.40 | 3.35 | 4.72 | 2.17 | - | 1 1/2" | 3/4" | 14.10 |
| Method of lifting |  |
 |
 |
 |
 |
|
 |
|
 |
 |
|||
| Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | 3+4 | |||
| Angle of inclination | 0° | 90° | 0° | 90° | 0‑45° | 45‑60° | 0‑45° | 45‑60° | asymm° | asymm° | |||
| PLAW Alpha | Code / Type | thread [mm] |
fastening torque [Nm] |
load capacity [kg] |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLAW 0,3 t | M8 | 35 | 300 | 300 | 600 | 600 | 400 | 300 | 600 | 400 | 300 | 300 | PLAW 0,63 t | M10 | 70 | 630 | 630 | 1,260 | 1,260 | 850 | 630 | 1,300 | 900 | 630 | 630 | PLAW 1 t | M12 | 120 | 1,000 | 1,000 | 2,000 | 2,000 | 1,400 | 1,000 | 2,100 | 1,500 | 1,000 | 1,000 | PLAW 1,5 t | M16 | 150 | 1,500 | 1,500 | 3,000 | 3,000 | 2,100 | 1,500 | 3,100 | 2,200 | 1,500 | 1,500 | PLAW 2,5 t | M20 | 170 | 2,500 | 2,500 | 5,000 | 5,000 | 3,500 | 2,500 | 5,300 | 3,700 | 2,500 | 2,500 | PLAW 4 t | M24 | 400 | 4,000 | 4,000 | 8,000 | 8,000 | 5,600 | 4,000 | 8,400 | 6,000 | 4,000 | 4,000 | PLAW 6 t | M30 | 500 | 6,000 | 6,000 | 12,000 | 12,000 | 8,500 | 6,000 | 12,700 | 9,000 | 6,000 | 6,000 | PLAW 7 t | M36 | 700 | 7,000 | 7,000 | 14,000 | 14,000 | 9,800 | 7,000 | 14,800 | 10,500 | 7,000 | 7,000 | PLAW 8 t | M36 | 800 | 8,000 | 8,000 | 16,000 | 16,000 | 11,300 | 8,000 | 16,900 | 12,000 | 8,000 | 8,000 | PLAW 10 t | M42 | 1,500 | 10,000 | 10,000 | 20,000 | 20,000 | 14,000 | 10,000 | 21,000 | 15,000 | 10,000 | 10,000 | PLAW 15 t | M42 | 1,500 | 15,000 | 15,000 | 30,000 | 30,000 | 21,000 | 15,000 | 31,500 | 22,500 | 15,000 | 15,000 | PLAW 20 t | M48 | 2,000 | 20,000 | 20,000 | 40,000 | 40,000 | 28,000 | 20,000 | 42,000 | 30,000 | 20,000 | 20,000 |
| Method of lifting | |
|
|
|
|
|
|
|
|
|
|||
| Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | 3+4 | |||
| Angle of inclination | 0° | 90° | 0° | 90° | 0‑45° | 45‑60° | 0‑45° | 45‑60° | asymm° | asymm° | |||
| PLAW Alpha | Code / Type | thread [inch] |
fastening torque [ft-lbs] |
load capacity [lbs] |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLAW U 3/8 | 3/8"-16 | 52 | 1,400 | 1,400 | 2,800 | 2,800 | 1,960 | 1,400 | 2,940 | 2,100 | 1,400 | 1,400 | PLAW U 1/2 | 1/2"-13 | 89 | 2,200 | 2,200 | 4,400 | 4,400 | 3,000 | 2,200 | 4,600 | 3,300 | 2,200 | 2,200 | PLAW U 5/8 | 5/8"-11 | 110 | 3,300 | 3,300 | 6,600 | 6,600 | 4,600 | 3,300 | 6,800 | 4,800 | 3,300 | 3,300 | PLAW U 3/4 | 3/4"-10 | 125 | 5,500 | 5,500 | 11,000 | 11,000 | 7,790 | 5,500 | 11,600 | 8,260 | 5,500 | 5,500 | PLAW U 1 | 1"-8 | 295 | 8,800 | 8,800 | 17,600 | 17,600 | 12,300 | 8,800 | 18,400 | 13,200 | 8,800 | 8,800 | PLAW U 1 1/4 | 1 1/4"-7 | 369 | 13,200 | 13,200 | 26,400 | 26,400 | 18,700 | 13,200 | 27,800 | 19,800 | 13,200 | 13,200 | PLAW U 1 1/2 | 1 1/2"-6 | 590 | 17,600 | 17,600 | 35,200 | 35,200 | 24,900 | 17,600 | 37,400 | 26,400 | 17,600 | 17,600 | PLAW U 1 3/4 | 1 3/4"-5 | 740 | 22,000 | 22,000 | 44,000 | 44,000 | 30,000 | 22,000 | 45,000 | 33,000 | 22,000 | 22,000 |
| Safety factor 4 Important: Subject to technical changes! |
|||||||||||||
Загрузки
BTD+ 9174CC -44 |
|
|
|
PLAW 0,3 t |
|
|
|
PLAW 0,63 t |
|
|
|
PLAW 1 t |
|
|
|
PLAW 1,5 t |
|
|
|
PLAW 10 t |
|
|
|
PLAW 15 t |
|
|
|
PLAW 2,5 t |
|
|
|
PLAW 20 t |
|
|
|
PLAW 4 t |
|
|
|
PLAW 6 t |
|
|
|
PLAW 7 t |
|
|
|
PLAW 8 t |
|
|
|
PLAW U 1 1/2 |
|
|
|
PLAW U 1/2 |
|
|
|
PLAW U 3/4 |
|
|
|
PLAW U 3/8 |
|
|
|
PLAW U 5/8 |
|
|
|