PLGW gamma
pewag winner profilift lifting point PLGW Gamma supreme eyebolt.Close to perfection.
Такелажна точка, яка була розроблена і виготовлена відповідно до найсучасніших стандартів: pewag winner profilift gamma supreme.
Опис продукту
Permitted usage
For load capacities in the permitted directions of pull, please refer to the load capacity table. Adjust the lifting point in the permitted load direction before loading.
- Loadable with a 4-fold safety factor under break in all directions.
Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:
- Direction of pull is obstructed.
- Direction of pull is not within the indicated area.
- Loading ring rests against edges or loads.
- Assembly with additional tools (e.g. extension) is not permitted.
For additional details and information, please refer to the full operating manual.
Calculating the required thread length (L):
L = H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.
In addition to the standard and maximum thread lengths, pewag also offers cut-to-length thread lengths. Customised and maximum thread lengths are supplied with a washer and a screw nut. Each lifting point comes with an individual serial number. Also available with peTAG upon request.
For detailed information such as method of lifting, number of legs, angle of inclination etc., please refer to the tables with the technical data.
3D-зображення
Відео
Таблиця характеристик
| PLGW gamma | Code / Type | thread [mm] |
load capacity [kg] |
a [mm] |
b [mm] |
c [mm] |
d [mm] |
e [mm] |
f [mm] |
n [mm] |
n max [mm] |
 [mm] |
weight [kg/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
PLGW 0,3 t | M8 | 300 | 25 | 45 | 10 | 27 | 53 | 35 | 15 | 90 | 6 | 0,20 | PLGW 0,5 t | M10 | 500 | 25 | 45 | 10 | 27 | 53 | 35 | 15 | 160 | 6 | 0,21 | PLGW 0,7 t | M12 | 700 | 30 | 55 | 12 | 32 | 63 | 43 | 20 | 160 | 8 | 0,29 | PLGW 1,5 t | M16 | 1.500 | 35 | 64 | 14 | 36 | 70 | 50 | 25 | 160 | 10 | 0,48 | PLGW 2,3 t | M20 | 2.300 | 40 | 73 | 16 | 41 | 81 | 54 | 30 | 160 | 12 | 0,58 | PLGW 3,2 t | M24 | 3.200 | 50 | 86 | 18 | 50 | 93 | 69 | 35 | - | 14 | 1,10 | PLGW 4,9 t | M30 | 4.900 | 60 | 110 | 25 | 60 | 114 | 90 | 45 | - | 17 | 2,20 | PLGW 7 t | M36 | 7.000 | 70 | 132 | 31 | 70 | 136 | 108 | 55 | - | 19 | 3,80 | PLGW 9 t | M42 | 9.000 | 80 | 152 | 36 | 72 | 153 | 126 | 65 | - | 22 | 5,70 | PLGW 12 t | M48 | 12.000 | 95 | 179 | 42 | 88 | 179 | 148 | 75 | - | 24 | 8,90 |
| PLGW gamma | Code / Type | thread [inch] |
load capacity [lbs] |
a [inch] |
b [inch] |
c [inch] |
d [inch] |
e [inch] |
f [inch] |
n [inch] |
n max [inch] |
[inch] |
weight [lbs/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLGW U 3/8 | 3/8"-16 | 1.100 | 0,98 | 1,77 | 0,39 | 1,06 | 2,09 | 1,38 | 0,59 | - | 1/4" | 0,44 | PLGW U 1/2 | 1/2"-13 | 1.500 | 1,18 | 2,17 | 0,47 | 1,26 | 2,48 | 1,69 | 0,79 | - | 5/16" | 0,71 | PLGW U 5/8 | 5/8"-11 | 3.300 | 1,38 | 2,52 | 0,55 | 1,42 | 2,76 | 1,97 | 0,98 | - | 3/8" | 0,99 | PLGW U 3/4 | 3/4"-10 | 4.400 | 1,57 | 2,87 | 0,63 | 1,61 | 3,19 | 2,13 | 1,18 | - | 1/2" | 1,28 | PLGW U 1 | 1"-8 | 6.600 | 1,97 | 3,39 | 0,71 | 1,97 | 3,66 | 2,72 | 1,38 | - | 9/16" | 2,43 | PLGW U 1 1/4 | 1 1/4"-7 | 8.800 | 2,36 | 4,33 | 0,98 | 2,36 | 4,49 | 3,54 | 1,77 | - | 5/8" | 4,63 | PLGW U 1 1/2 | 1 1/2"-6 | 15.400 | 2,76 | 5,20 | 1,22 | 2,76 | 5,35 | 4,25 | 2,17 | - | 7/8" | 8,38 | PLGW U 1 3/4 | 1 3/4"-5 | 19.800 | 3,15 | 5,98 | 1,42 | 2,83 | 6,02 | 4,96 | 2,56 | - | 1" | 12,57 |
| Method of lifting |  |
 |
 |
 |
 |
|
 |
|
 |
 |
|||
| Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | 3+4 | |||
| Angle of inclination | 0° | 90° | 0° | 90° | 0‑45° | 45‑60° | 0‑45° | 45‑60° | asymm° | asymm° | |||
| PLGW gamma | Code / Type | thread [mm] |
fastening torque [Nm] |
load capacity [kg] |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLGW 0,3 t | M8 | Simply tighten by hand | 1.000 | 300 | 2.000 | 600 | 420 | 300 | 630 | 450 | 300 | 300 | PLGW 0,5 t | M10 | Simply tighten by hand | 1.500 | 500 | 3.000 | 1.000 | 700 | 500 | 1.060 | 750 | 500 | 500 | PLGW 0,7 t | M12 | Simply tighten by hand | 2.000 | 700 | 4.000 | 1.400 | 980 | 700 | 1.480 | 1.050 | 700 | 700 | PLGW 1,5 t | M16 | Simply tighten by hand | 4.000 | 1.500 | 8.000 | 3.000 | 2.100 | 1.500 | 3.180 | 2.200 | 1.500 | 1.500 | PLGW 2,3 t | M20 | Simply tighten by hand | 5.000 | 2.300 | 10.000 | 4.600 | 3.200 | 2.300 | 4.800 | 3.400 | 2.300 | 2.300 | PLGW 3,2 t | M24 | Simply tighten by hand | 6.500 | 3.200 | 13.000 | 6.400 | 4.500 | 3.200 | 6.700 | 4.800 | 3.200 | 3.200 | PLGW 4,9 t | M30 | Simply tighten by hand | 12.000 | 4.900 | 24.000 | 9.800 | 6.900 | 4.900 | 10.300 | 7.300 | 4.900 | 4.900 | PLGW 7 t | M36 | Simply tighten by hand | 15.000 | 7.000 | 30.000 | 14.000 | 9.800 | 7.000 | 14.800 | 10.500 | 7.000 | 7.000 | PLGW 9 t | M42 | Simply tighten by hand | 22.000 | 9.000 | 44.000 | 18.000 | 12.600 | 9.000 | 19.000 | 13.500 | 9.000 | 9.000 | PLGW 12 t | M48 | Simply tighten by hand | 30.000 | 12.000 | 60.000 | 24.000 | 16.900 | 12.000 | 25.400 | 18.000 | 12.000 | 12.000 |
| Method of lifting | |
|
|
|
|
|
|
|
|
|
|||
| Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | 3+4 | |||
| Angle of inclination | 0° | 90° | 0° | 90° | 0‑45° | 45‑60° | 0‑45° | 45‑60° | asymm° | asymm° | |||
| PLGW gamma | Code / Type | thread [inch] |
fastening torque [ft-lbs] |
load capacity [lbs] |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLGW U 3/8 | 3/8"-16 | Simply tighten by hand | 2.400 | 1.100 | 4.800 | 2.200 | 1.500 | 1.100 | 2.200 | 1.500 | 1.100 | 1.100 | PLGW U 1/2 | 1/2"-13 | Simply tighten by hand | 4.400 | 1.500 | 8.800 | 3.000 | 2.200 | 1.500 | 3.000 | 2.200 | 1.500 | 1.500 | PLGW U 5/8 | 5/8"-11 | Simply tighten by hand | 8.800 | 3.300 | 17.600 | 6.600 | 4.600 | 3.300 | 6.600 | 4.800 | 3.300 | 3.300 | PLGW U 3/4 | 3/4"-10 | Simply tighten by hand | 9.900 | 4.400 | 19.800 | 8.800 | 6.100 | 4.400 | 9.200 | 6.600 | 4.400 | 4.400 | PLGW U 1 | 1"-8 | Simply tighten by hand | 11.000 | 6.600 | 22.000 | 13.200 | 9.200 | 6.600 | 13.600 | 9.900 | 6.600 | 6.600 | PLGW U 1 1/4 | 1 1/4"-7 | Simply tighten by hand | 22.000 | 8.800 | 44.000 | 17.600 | 12.300 | 8.800 | 18.000 | 13.200 | 8.800 | 8.800 | PLGW U 1 1/2 | 1 1/2"-6 | Simply tighten by hand | 33.000 | 15.400 | 66.000 | 30.800 | 21.500 | 15.400 | 32.300 | 23.100 | 15.400 | 15.400 | PLGW U 1 3/4 | 1 3/4"-5 | Simply tighten by hand | 40.000 | 19.800 | 80.000 | 39.600 | 27.700 | 19.800 | 41.500 | 29.700 | 19.800 | 19.800 |
| Safety factor 4 Important: Subject to technical changes! |
|||||||||||||
Завантаження
PLGW 0,3 t |
|
|
|
PLGW 0,5 t |
|
|
|
PLGW 0,7 t |
|
|
|
PLGW 1,5 t |
|
|
|
PLGW 12 t |
|
|
|
PLGW 2,3 t |
|
|
|
PLGW 3,2 t |
|
|
|
PLGW 4,9 t |
|
|
|
PLGW 7 t |
|
|
|
PLGW 9 t |
|
|
|
PLGW U 1 |
|
|
|
PLGW U 1 1/2 |
|
|
|
PLGW U 1 1/4 |
|
|
|
PLGW U 1 3/4 |
|
|
|
PLGW U 1/2 |
|
|
|
PLGW U 3/4 |
|
|
|
PLGW U 3/8 |
|
|
|
PLGW U 5/8 |
|
|
|